VIP Coatings QuickFill SL Standard is a low viscosity, two-component, 100% solids joint filler for static joints and crack repairs in concrete substrates.
This self-levelling material has been especially designed for horizontal applications requiring a slower set time to facilitate deep penetration and to enhance self levelling.
The product can be easily and rapidly installed in static joints and cracks. It penetrates into fractures of joints preventing water intrusion and sub-structure damage. It is an excellent maintenance solution and it seals against most fluids and other contaminants.
After initial cure it can be trimmed flat if necessary.
Features:
- Applied with an easy-to-use twin cartridge dispensing gun – the VIP Coatings Manual Dispensing Gun
- Low viscosity allows deep penetration and tenacious bonding
- VOC free, 100% solids
- Self levelling
- Instant repair, drive over in 60 minutes
- Excellent sealing and permeability properties
- Stays flexible even in extremely cold environments
- Moisture insensitive during the application and curing processes
- Formulation is based on Polyurea technology
- Resistant to most chemicals, cleaners, fuels and oils
- Excellent abrasion and high impact resistance
Typical Uses
- Sealing cable channels and inductive loops
- Repairing and sealing cracked concrete
- Sealing static construction joints in concrete
- Embedding and sealing pressure sensitive signalling cabling
- Cold Storage Applications due to low temperature cure
- Filling concrete spalling damage on factory floors
Reviews
There are no reviews yet.