• Fast Delivery
  • Expert Support
  • Low Trade Prices
  • Quality Products
  • Next-Day Delivery
  • Expert Support
  • Low Trade Prices
  • Quality Products
Newton HydroCoat Tanking Slurry - 20kg Bag in BucketNewton HydroCoat Tanking Slurry - 20kg Bag in Bucket

Newton HydroCoat Tanking Slurry – 20kg Bag in Bucket

Brand: Newton Waterproofing Systems
Product Code: HSS-20B
In Stock

Newton HydroCoat Tanking Slurry is a BBA approved, single-component mineral coating that is simple to mix, easy to apply, and includes advanced crystallising and capillary-blocking chemicals that also enhance the bond of the coating to the substrate.

£41.40 incl. VAT
£34.50 excl. VAT

Qty:

Cementitious Waterproof Coating. Newton HydroCoat Tanking Slurry is a BBA approved, single-component mineral coating that is simple to mix and easy to apply. Unlike conventional slurries, HydroCoat Tanking Slurry includes advanced crystallising and capillary-blocking chemicals that also enhance the bond of the coating to the substrate.

HydroCoat Tanking Slurry can be applied both internally and externally to a variety of substrates to form an effective barrier against positive and negative hydrostatic pressure, as well as non-pressurised moisture in the ground for use in damp-proofing applications.

Applied in two coats, the 2mm coating is waterproof against water pressure of up to 7 bar. In addition to increasing the bond, the penetrating crystallising chemicals react with water and the calcium hydroxide within the concrete to actively seal developing micro-cracks.

Newton HydroCoat Tanking Slurry is supplied as a 20kg bag within a plastic mixing bucket. To order the product in just the 20kg bag, without the mixing bucket, see the product listing for Newton HydroCoat Tanking Slurry – 20kg Bag.

Key Benefits: 

  • Easy to mix, single-component slurry coating
  • Brush, trowel or spray applied
  • 2 mm slurry coat is fully waterproof to 7 bar
  • Crystallising agents penetrate deep into the substrate to enhance bond and seal capillaries and small, developing cracks
  • Permanent waterproofing of a wide variety of substrates
  • Resists positive and negative water pressure and so is suitable for internal and external use
  • Resistant to salt contamination in masonry WRAS approved for use with potable water
  • Suitable for application to damp substrate
  • Can be part-mixed Vapour permeable

Typical Waterproofing Applications: 

  • Basements & cellars Retaining walls of concrete, brick and block Tanks, pools, ponds & planters

Suitable Substrates: 

  • Concrete
  • Structural masonry/mortar

Suitable Surfaces:

Waterproofing of:

  • Walls – positive pressure and negative pressure
  • Slab/raft
  • Negative pressure
  • Soffit – Negative pressure

Method of Application: 

Slurry waterproofing:

  • Brush
  • Trowel
  • Airless Spray
Features Result Units
Form Powder
Colour Grey
Pack size 20 kg
Shelf life 12 Months
Pot life @ 20ºC 30 Minutes
Application Rate as Two Coat Tanking Slurry 2.8 kg/m2
Application Temperature +5 to +35 ºC
Service temperature -15 to +180 ºC
Odour Odourless
VOC content 0 %
Cured performance (Typical Values) Result Units
Colour Grey
Slurry tanking thickness in one coat 2 mm
Elongation Not elastomeric
Flexural strength (28 days) 7 N/mm2
Compressive Strength (28 Days) 20 N/mm2
Hardened Density (28 Days) 1850 Kg/m2
Resistance to Water Pressure ≥ 7 Bar
Reaction to Fire Classification Euroclass F
UV-resistance Stable but may discolour

Please see our our Delivery policy page for full details of our delivery terms and conditions, including information on exclusions, geographical restrictions, third parties, and failed deliveries.

1. Delivery Timescales

We will endeavour to deliver all orders within 1-3 working days (subject to geographical restrictions). Please note, where delivery lead-times for individual orders may be subject to change, we will keep you informed directly by phone or email within 24 hours of your order being placed.

Deliveries will not be made on UK bank holidays, and in such cases will fall on the next working day.

Standard delivery hours are between 8am and 6pm, Monday to Friday. If you are not available to accept the delivery when it is attempted, then a failed delivery charge will be applied (see the Delivery page for full details)

2. Delivery Fee Structure:

All orders, excluding those containing products covered in section 3 below, will be subject to the below delivery fee structure:

  1. Total order weight is between 0kg and 10kg = £7.99 standard delivery fee
  2. Total order weight is between 10kg and 20kg = £12.99 standard delivery fee
  3. Total order weight is between 20kg and 75kg = £20 standard delivery fee
  4. Total order weight is 75kg and above = £60 large order delivery fee
  5. Total order value exceeds £500 (regardless of weight) = Free delivery

3. Exclusions

The delivery fees detailed above apply to all orders, excluding:

  1. Orders containing insulation will be charged at £60 per pallet (10 units per pallet). Please get in touch with us directly for pricing and ordering.
  2. Orders containing protection boards: A large order delivery fee of £60 will be applied.
  3. Orders containing membranes of two metres wide and above: The delivery fee will be calculated as a price per unit*.
Code Description Weight (kg) Delivery Fee Per Unit
Multiple All membrane products with a width of two metres and above Varied £20
M3 Newton CDM 508 Mesh 29.26 £25
M2 Newton CDM 508 eco Floor 41.3 £30
M4 Newton CDM 520 eco Floor 37.62 £40

*Please note that, for orders containing membranes of two metres wide and above:

  1. Once the total order weight exceeds 75kg then the £60 large order fee will automatically be applied
  2. Once the total order value exceeds £500 then the free delivery policy will automatically be applied

4. Geographical Areas

The above delivery fees apply to all postcodes in mainland England, Wales and Scotland.

For deliveries to Ireland, Northern Ireland, the Channel Islands, the Scottish Isles, and any international orders please get in touch with the BaseTec team directly by email or phone for a custom delivery price. Standard delivery timescales do not apply to these areas and will be advised on request.

Additional charges, including customs fees, duties, or taxes may apply for international orders.

Reviews

There are no reviews yet.

Be the first to review “Newton HydroCoat Tanking Slurry – 20kg Bag in Bucket”

You may also like…

Shopping Basket
INC VAT EX VAT