Fast-Setting Mortar with Minimum 10mm Thickness. NATCEM 35 is an environmentally friendly, fast-setting mortar with rapid strength gain, suitable for installation up to any thickness from a minimum of 10mm. The product is suitable for a wide range of applications and starts to set after 35 minutes and is totally set in 40 minutes.
NATCEM 35 contains no chemical additives and only requires the addition of water. The product does not require steel primers, bonding agents or curing agents. It can be used in cold, wet or underwater conditions and is also DWI Reg.31 approved for contact with potable water with only a 30-minute curing period required after set.
Applications:
- Concrete Repairs
- Waterproof Renders
- Tanking / Waterproofing
- Damp Proofing
- Floor Screeds
- Grouting / Void filling
- Direct contact with potable drinking water
- Wastewater Environments
- Underwater
- Coastal Environments
- Swimming Pools
- Pointing
- Rivers and Canals
- Environmentally sensitive areas
- Farm Yards
- Conservation of historic buildings
- General repairs and construction
Benefits:
- Fast-setting with rapid strength gain
- No curing period requiredΒ
- Excellent adhesionΒ
- Only requires the addition of water
- WaterproofΒ
- Low shrinkageΒ
- DWI Reg.31 ApprovedΒ
- Corrosion ResistantΒ
- Sulphate resistantΒ
- Resistant to chloride penetrationΒ
- High chemical resistanceΒ
- Sets UnderwaterΒ
- Can be used in freezing temperaturesΒ
- Environmentally friendly & low carbon footprintΒ
- Contains no chemical additivesΒ
- No shelf life
Reviews
There are no reviews yet.