• Fast Delivery
  • Expert Support
  • Low Trade Prices
  • Quality Products
  • Next-Day Delivery
  • Expert Support
  • Low Trade Prices
  • Quality Products
Helifix Polyplus Polyester Resin - 400mlHelifix Polyplus Polyester Resin - 400ml

Helifix Polyplus Polyester Resin – 400ml

Brand: Helifix
Product Code: HX-CS-PR4
In Stock

Helifix Polyplus is a General Purpose Polyester Resin. The two part, nozzle-mixed polyester resin is ideal for securing remedial wall ties and resin bonded anchors.

£19.80 incl. VAT
£16.50 excl. VAT

Qty:

Helifix Polyplus is a General Purpose Polyester Resin. The two part, nozzle-mixed polyester resin is ideal for securing remedial wall ties and resin bonded anchors. Applications: – For securing remedial wall ties, resin bonded anchors and threaded rods – Used to secure RetroTie and ResiTie remedial wall ties

Features: 

  • Two part nozzle-mixed resin for consistent quality
  • Anchors without expansion pressure
  • Clean and easy to use in all types of masonry
  • 400ml part-usable coaxial cartridge

Installation as a resin anchor: 

  1. Drill the hole to the correct diameter and depth using a rotary percussion drill.
  2. Clean the hole using a stiff wire or nylon brush and clean compressed air or blow pump
  3. Once the hole is prepared remove the screw cap from the cartridge.
  4. Attach mixer nozzle, place in applicator gun and dispense the first part of the cartridge to waste until an even colour is achieved
  5. Insert the mixer nozzle to the far end of the hole and half fill hole (depending upon the application). Withdraw nozzle as you fill the hole. For deep holes, extension tubing can be used.
  6. Immediately insert the tie or fixing using a slight twisting motion.
  7.  Excess resin should be removed from the mouth of the hole before it sets.
  8. Leave the fixing undisturbed until loading time has elapsed, then attach the fixture and tighten the nut.
Temperature Gel Time Service load time
5°C 18 mins 120 mins
10°C 10 mins 80 mins
20°C 6 mins 40 mins
25°C 5 mins 30 mins
30°C 4 mins 20 mins
Typical Performance
12mm ø bolt, 110mm deep in 14mm ø hole 30/Nmm2 concrete Characteristic tensile load (NRk) 23.9kN
Storage conditions Cool, dry, frost-free conditions away from direct sunlight
Storage temperature 5°C to 20°C
Shelf life 12 months under normal conditions
Cartridge size 400ml

 

Please see our our Delivery policy page for full details of our delivery terms and conditions, including information on exclusions, geographical restrictions, third parties, and failed deliveries.

1. Delivery Timescales

We will endeavour to deliver all orders within 1-3 working days (subject to geographical restrictions). Please note, where delivery lead-times for individual orders may be subject to change, we will keep you informed directly by phone or email within 24 hours of your order being placed.

Deliveries will not be made on UK bank holidays, and in such cases will fall on the next working day.

Standard delivery hours are between 8am and 6pm, Monday to Friday. If you are not available to accept the delivery when it is attempted, then a failed delivery charge will be applied (see the Delivery page for full details)

2. Delivery Fee Structure:

All orders, excluding those containing products covered in section 3 below, will be subject to the below delivery fee structure:

  1. Total order weight is between 0kg and 10kg = £7.99 standard delivery fee
  2. Total order weight is between 10kg and 20kg = £12.99 standard delivery fee
  3. Total order weight is between 20kg and 75kg = £20 standard delivery fee
  4. Total order weight is 75kg and above = £60 large order delivery fee
  5. Total order value exceeds £500 (regardless of weight) = Free delivery

3. Exclusions

The delivery fees detailed above apply to all orders, excluding:

  1. Orders containing insulation will be charged at £60 per pallet (10 units per pallet). Please get in touch with us directly for pricing and ordering.
  2. Orders containing protection boards: A large order delivery fee of £60 will be applied.
  3. Orders containing membranes of two metres wide and above: The delivery fee will be calculated as a price per unit*.
Code Description Weight (kg) Delivery Fee Per Unit
Multiple All membrane products with a width of two metres and above Varied £20
M3 Newton CDM 508 Mesh 29.26 £25
M2 Newton CDM 508 eco Floor 41.3 £30
M4 Newton CDM 520 eco Floor 37.62 £40

*Please note that, for orders containing membranes of two metres wide and above:

  1. Once the total order weight exceeds 75kg then the £60 large order fee will automatically be applied
  2. Once the total order value exceeds £500 then the free delivery policy will automatically be applied

4. Geographical Areas

The above delivery fees apply to all postcodes in mainland England, Wales and Scotland.

For deliveries to Ireland, Northern Ireland, the Channel Islands, the Scottish Isles, and any international orders please get in touch with the BaseTec team directly by email or phone for a custom delivery price. Standard delivery timescales do not apply to these areas and will be advised on request.

Additional charges, including customs fees, duties, or taxes may apply for international orders.

Reviews

There are no reviews yet.

Be the first to review “Helifix Polyplus Polyester Resin – 400ml”

You may also like…

Shopping Basket
INC VAT EX VAT