MS Polymer Based Fluid Liquid Membrane. FIXA Polymera MS Fluid is a single component, fluid, ready-to-use, solvent and isocyanate free, UV resistant, high technology coating and waterproofing material, produced with MS Polymer hybrid technology.
POLYMERA MS FLUID can be used for waterproofing of horizontal and vertical large surfaces and for bridging capillary cracks up to 3 mm.
Application Areas:
- Indoor and outdoor,
- Waterproofing and local repairs of horizontal surfaces, thanks to its self levelling properties,
- Waterproofing and local repair of vertical surfaces, thanks to its ease of application with roller or brush,
- On almost all kind of mineral surfaces, such as concrete, stone, marble, ceramic, tile, all kinds of wood, glass, metal, tile, brick, betopan, aerated concrete, and their combinations,
- Balconies, terraces or inclined roofs where waterproofing is required, on wood and metal surfaces, in intersections of chimneys, ventilations and skylights,
- Wet areas such as bathrooms and kitchens,
- Places below ground level, such as foundations, garage and basements, against non-pressurized water and ground moisture.
Advantages:
POLYMERA MS FLUID is an MS Polymer based product with high technical qualifications, developed with Japanese technology. MS Polymer technology has important advantages compared to existing polyurethane, silicone, bitumen or cement-acrylic based coatings:
- Does not contain solvent and isocyanate which are harmful to human health and to the environment.
- Has 100% elastomeric composition, does not shrink as it does not contain solvent.
- Resistant to UV, does not crack, sag or turn to yellow. Can be safely used outdoors.
- Bonds even on damp surfaces, provides high adherence.
- Not harmful to human health and to the environment thanks to its low VOC values. Almost odorless.
- Easily and quickly applied with a brush or a roller.
- Does not form seams. Overpaintable.
- Very flexible. Can cover the cracks up to 3 mm, fills the cracks up to 2 mm. Keeps its elasticity and bonding properties in joints and cracks caused by the movements of the buildings. Turns to its original form perfectly.
- Protects its elasticity even in low temperatures, after being cured.
Consumption:
1.40 – 1.50 kg/m2 for approximately 1 mm thickness in each layer. (Varies depending on the application area, roughness and absorption of the surface.) At least two layers are recommended.
Reviews
There are no reviews yet.