Filoform Filoseal+ 150mm-200mm Duct Sealing System

The FiloSeal+ duct sealing system is a universal solution for sealing cables and pipes in ducts or bore holes of 150-200mm. 

FiloSeal+ is suitable for sealing several cables or pipes contained in one duct and also allows re-entry of the seal to add or remove cables or pipes as required. 

The Filoform duct sealing system uses the Filoform MD+ sealant which is easily applied from a standard skeleton gun. The high quality, one component, flexible sealant is based on a silicone compound that air-cures. After application and full curing, the thixotropic MD+ forms a plastic elastomer mass with special qualities effectively sealing and bonding, while providing a high level of durability.

FiloSeal+ is very easy to apply regardless of the type of cable scenario in the cable ducts as it uses a uniquely shaped foam piece which positions neatly around the cables or pipes in the duct. The unique design of the tri-flexible foam makes positioning and separation of the cables very simple while also providing a backing for the MD+ to be applied on. 

This seal is also easily installed in vertical scenarios while providing the added security of ensuring no loss of components down the duct. 

Features: 

• Flexible, one component, adhesive and sealing compound in a cartridge – (310ml) 
• Kits are complete with backing and mastic to fill an empty duct of the quoted kit size 
• High levels of Gas and Water tightness 
• Excellent adhesion 
• Shows Fire resistance properties 
• Resistant against Water, Alkaline, Chemical agents 
• Resistant to, Petrol, Diesel, Ethanol, ASTM oil, LPG & Many more. 
• Suitable for sealing underground cable ducts set out within the APEA ‘Blue Book’
•  Resistant to Hydrogen Sulphide / Methane and many other Gases (NedLab) 
• Non-corrosive 
• Solvent-free 
• Shock absorbing 
• Non-toxic, neutral and almost odourless 
• Also suitable for limiting the EX-zones during transitions (observe chemical resistance)
•  Complies with 2011 NEC Articles 225.27, 230.8, 300.5(G), 300.7 (A) on Raceway Seals, and 501.15 (B)(2) 
• WIMES Compliant, (3.02 2013 clause 6.4.3.2 d) – Suitable for any shaped duct /borehole/opening 
• Quick and easy installation – A complete kit for one duct 
• Seals all know materials, PVC & PE sheathed cables, PILC, (HD) PE pipes 
• Suitable for renovations, can be installed retrospectively 

Approvals: 

• Thames Water Approved 
• Welsh Water Approved 
• Severn Trent Water Approved 
• Southern Water Approved 
• Anglian Water Approved 
• South East Water Approved 
• Yorkshire Water Approved 
• Bournemouth Water Approved 
• Scottish Water Approved