Newton Newtonite Damp Proofing Membrane – 2m x 20m

Brand: Newton Waterproofing Systems

Product Code: M20

In Stock

Newton Newtonite is a high-quality damp proof membrane used as an alternative membrane where a meshed surface is not required. Quick to apply, rot-proof and easy to use, Newton Newtonite is typically used where the wall finish to the damp-proof membrane is timber battens, a dry-lining frame, or block wall. Newton Newtonite is supplied as a 2m x 20m roll.

£203.41 incl. VAT

£169.51 excl. VAT

Newton Newtonite is a high-quality damp proof membrane for use above ground as an alternative to Newtonite Lath Mesh Membrane where a meshed surface is not required as a surface for direct plastering or rendering – typically where the wall finish to the damp proof membrane is timber battens, a dry-lining frame or block wall.

Key Benefits:

Isolation of wall finish from the damp wall.
Does not require extensive and damaging preparation to the wall surface.
Speed of installation.
Resistant to efflorescing salts and hydrocarbon contamination.
Rot-proof.
Shallow stud profile for where space is at a premium.

Typical Applications:

As a damp-proof membrane to isolate the wall finish from the damp wall where a meshed surface for plaster or render is not required.
Newton Newtonite (Non-Meshed) is available in rolls of 2m x 20m = 40m2.
Newton Newtonite is typically used where the wall finish to the damp-proof membrane is timber battens, a dry-lining frame or block wall. Newton Newtonite is 0.5mm thick and has a pattern of raised 3mm studs. The studs face the wall and create air channels that allow for vapour equalisation to take place between the membrane and the wall.
Newton Newtonite is light, clean and easy to handle. It can be cut with a sharp knife, scissors or shears. The membrane is inert and is highly resistant to water, alkalis, saline solutions and organic acids, and it is not affected by minerals. It is also resistant to bacteria, fungi and other small organisms.
Newton Newtonite is guaranteed against deterioration for 30 years, and has a life expectancy of at least 50 years (DIN 9001:2000).

Features	Result	Units
Material	HDPE
Colour	White/translucent
Density	500	g/m2
Width	1.0/2.0	m
Length	10 / 20	m
Area	10 / 40	m2
Membrane thickness	0.60	mm
Stud depth	2.90	mm
Height	3.50	mm
Vicat softening temperature	126	ºC
Packaged weight	23.0	kg
Service temperature	-40 to +80	ºC

Installed Performance	Result	Units	Test Method
Thermal conductivity	0.461	W/mK	EN 12667
Water vapour diffusion resistance – Sd value	>604	m	BS EN 1931
Water vapour diffusion resistance – µ value	>1208000	µ	Calculated from SD value
Water vapour diffusion resistance	>3020	MNs/g	Calculated from SD value
Resistance to fire	Euroclass E		BS EN 13501-1
Chemical resistance – Excellent	100	%	EN14030
Oxidation resistance – Excellent	100	%	EN ISO 13438

DoC: Newtonite Damp Proofing Membrane
DoP: Newtonite Damp Proofing Membrane
Data Sheet: Newtonite Damp Proofing Membrane

Please see our our Delivery policy page for full details of our delivery terms and conditions, including information on exclusions, geographical restrictions, third parties, and failed deliveries.

1. Delivery Timescales

We will endeavour to deliver all orders within 1-3 working days (subject to geographical restrictions). Please note, where delivery lead-times for individual orders may be subject to change, we will keep you informed directly by phone or email within 24 hours of your order being placed.

Deliveries will not be made on UK bank holidays, and in such cases will fall on the next working day.

Standard delivery hours are between 8am and 6pm, Monday to Friday. If you are not available to accept the delivery when it is attempted, then a failed delivery charge will be applied (see the Delivery page for full details)

2. Delivery Fee Structure:

All orders, excluding those containing products covered in section 3 below, will be subject to the below delivery fee structure:

Total order weight is between 0kg and 10kg = £7.99 standard delivery fee
Total order weight is between 10kg and 20kg = £12.99 standard delivery fee
Total order weight is between 20kg and 75kg = £20 standard delivery fee
Total order weight is 75kg and above = £60 large order delivery fee
Total order value exceeds £500 (regardless of weight) = Free delivery

3. Exclusions

The delivery fees detailed above apply to all orders, excluding:

Orders containing insulation will be charged at £65 per pallet (10 units per pallet). Please get in touch with us directly for pricing and ordering.
Orders containing protection boards: A large order delivery fee of £60 will be applied.
Orders containing membranes of two metres wide and above: The delivery fee will be calculated as a price per unit*.

Code	Description	Weight (kg)	Delivery Fee Per Unit
Multiple	All membrane products with a width of two metres and above	Varied	£20
M3	Newton CDM 508 Mesh	29.26	£25
M2	Newton CDM 508 eco Floor	41.3	£30
M4	Newton CDM 520 eco Floor	37.62	£40

*Please note that, for orders containing membranes of two metres wide and above:

Once the total order weight exceeds 75kg then the £60 large order fee will automatically be applied
Once the total order value exceeds £500 then the free delivery policy will automatically be applied

4. Geographical Areas

The above delivery fees apply to all postcodes in mainland England, Wales and Scotland.

For deliveries to Ireland, Northern Ireland, the Channel Islands, the Scottish Isles, and any international orders please get in touch with the BaseTec team directly by email or phone for a custom delivery price. Standard delivery timescales do not apply to these areas and will be advised on request.

Additional charges, including customs fees, duties, or taxes may apply for international orders.