Tekinject PU 1C HYDRO - Hydrophilic Pre-Catalysed Injection Resin

Tekinject PU 1C HYDRO – Hydrophilic Pre-Catalysed Injection Resin

Name: Tekinject PU 1C HYDRO - Hydrophilic Pre-Catalysed Injection Resin
SKU: TPU/1CHYDRO
Price: 248.40 GBP
Availability: InStock

Brand: Tekinject

Product Code: TPU/1CHYDRO

In Stock

Tekinject PU 1C HYDRO is a 1-component, MDI-based, hydrophilic, VOC-free, polyurethane based injection system. The resin reacts with water to create a flexible and dense foam, designed for sealing joints, cracks and stopping high volumes of water.

£298.08 incl. VAT

£248.40 excl. VAT

TEKINJECT PU 1C HYDRO is an injection system used for sealing joints, cracks and stopping high volumes of water. In combination with sufficient water, it can be used for:

Sealing of cracks (from 0.3 mm up to 20 mm)
Sealing of joints (up to 20 mm)
Sealing of water under high flow
Excellent sealing capabilities to seal tunnel segments

Properties:

Needs sufficient water in order to react and transforms into a flexible and dense closed cell compound material
Even in alternating water tables, the hydrophilic capabilities of the resin ensure a long-term sealing by reversable swelling
Good chemical resistance against many acids, bases, solvents, and fuels (check chemical resistance list)
Free expansion (depending on the amount of water used)
Non-toxic: does not contain solvents
Non-flammable
Excellent adhesion on mineral building materials such as concrete, cement and brick

Tekinject PU 1C HYDRO
Colour	Yellow
Viscosity (20°C)	350 mPa.s
Density (20°C)	1.1 g/cm³
Flash point	> 148°C
Storage temperature	Between 10°C and 30°C
Min. application temperature	5°C (lower is possible with adapted techniques)
Expansion volume	Depending on the volume of water (see 2. Properties)

Reaction Times
1 volume of resin – 1 volume of water (25°C)
Start: 20 sec
End: 1 min 30 sec

Please see our our Delivery policy page for full details of our delivery terms and conditions, including information on exclusions, geographical restrictions, third parties, and failed deliveries.

1. Delivery Timescales

We will endeavour to deliver all orders within 1-3 working days (subject to geographical restrictions). Please note, where delivery lead-times for individual orders may be subject to change, we will keep you informed directly by phone or email within 24 hours of your order being placed.

Deliveries will not be made on UK bank holidays, and in such cases will fall on the next working day.

Standard delivery hours are between 8am and 6pm, Monday to Friday. If you are not available to accept the delivery when it is attempted, then a failed delivery charge will be applied (see the Delivery page for full details)

2. Delivery Fee Structure:

All orders, excluding those containing products covered in section 3 below, will be subject to the below delivery fee structure:

Total order weight is between 0kg and 10kg = £7.99 standard delivery fee
Total order weight is between 10kg and 20kg = £12.99 standard delivery fee
Total order weight is between 20kg and 75kg = £20 standard delivery fee
Total order weight is 75kg and above = £60 large order delivery fee
Total order value exceeds £500 (regardless of weight) = Free delivery

3. Exclusions

The delivery fees detailed above apply to all orders, excluding:

Orders containing insulation will be charged at £65 per pallet (10 units per pallet). Please get in touch with us directly for pricing and ordering.
Orders containing protection boards: A large order delivery fee of £60 will be applied.
Orders containing membranes of two metres wide and above: The delivery fee will be calculated as a price per unit*.

Code	Description	Weight (kg)	Delivery Fee Per Unit
Multiple	All membrane products with a width of two metres and above	Varied	£20
M3	Newton CDM 508 Mesh	29.26	£25
M4	Newton CDM 520 eco Floor	37.62	£40

*Please note that, for orders containing membranes of two metres wide and above:

Once the total order weight exceeds 75kg then the £60 large order fee will automatically be applied
Once the total order value exceeds £500 then the free delivery policy will automatically be applied

4. Geographical Areas

The above delivery fees apply to all postcodes in mainland England, Wales and Scotland.

For deliveries to Ireland, Northern Ireland, the Channel Islands, the Scottish Isles, and any international orders please get in touch with the BaseTec team directly by email or phone for a custom delivery price. Standard delivery timescales do not apply to these areas and will be advised on request.

Additional charges, including customs fees, duties, or taxes may apply for international orders.

Reviews

There are no reviews yet.

Be the first to review “Tekinject PU 1C HYDRO – Hydrophilic Pre-Catalysed Injection Resin”

You must be logged in to post a review.