• Fast Delivery
  • Expert Support
  • Low Trade Prices
  • Quality Products
  • Next-Day Delivery
  • Expert Support
  • Low Trade Prices
  • Quality Products
Placeholder

VIP Coatings QuickFill SL Standard – 600ml Dark Grey

Brand: VIP Coatings
Product Code: QFL14007
In Stock

VIP Coatings QuickFill SL Standard is a low viscosity, two-component, 100% solids and self-levelling joint filler for static joints and crack repairs in concrete substrates.

£20.27 incl. VAT
£16.89 excl. VAT

Qty:

VIP Coatings QuickFill SL Standard is a low viscosity, two-component, 100% solids joint filler for static joints and crack repairs in concrete substrates.

This self-levelling material has been especially designed for horizontal applications requiring a slower set time to facilitate deep penetration and to enhance self levelling.

The product can be easily and rapidly installed in static joints and cracks. It penetrates into fractures of joints preventing water intrusion and sub-structure damage. It is an excellent maintenance solution and it seals against most fluids and other contaminants.

After initial cure it can be trimmed flat if necessary.

Features:

  • Applied with an easy-to-use twin cartridge dispensing gun – the VIP Coatings Manual Dispensing Gun
  • Low viscosity allows deep penetration and tenacious bonding
  • VOC free, 100% solids
  • Self levelling
  • Instant repair, drive over in 60 minutes
  • Excellent sealing and permeability properties
  • Stays flexible even in extremely cold environments
  • Moisture insensitive during the application and curing processes
  • Formulation is based on Polyurea technology
  • Resistant to most chemicals, cleaners, fuels and oils
  • Excellent abrasion and high impact resistance

Typical Uses

  • Sealing cable channels and inductive loops
  • Repairing and sealing cracked concrete
  • Sealing static construction joints in concrete
  • Embedding and sealing pressure sensitive signalling cabling
  • Cold Storage Applications due to low temperature cure
  • Filling concrete spalling damage on factory floors
Processing Properties Data
Mixing Ratio (A:B) 100:100 by volume
Recommended thickness (mm) n.a.
Number of layers n.a.
Gelification time at 20°C (min) 8.0 – 10.0
Tack-free time at 20°C (min) 14 – 15
Hardness/Curing at 20°C  1h: 80 – 90%
24h: nearly 100%
Temperature range for application (ambience) [°C] 0 – +50
Temperature range for application (substrate) [°C] 0 – +50
Material temperature of both components [°C] > 20
Maximal relative air humidity for application [%] 95 – 99
Pay attention to the dew point limit min. 3K > DP (dew point)

 

Physical Properties Data
Chemical base – Comp. A: HDI-Prepolymer
Comp. B: Mod. Polyaspartics/Polyurea
VOC content DIN EN ISO 11890-1 / ASTM D-1259 0%
Solids content DIN EN 827 / ASTM D-2697 100%
Colour – Black
Viscosity [mPa*s] @ 25°C  DIN EN ISO 2884-2 / ASTM D-4878 Comp. A: 500 – 900
Comp B: 600 – 1.200
Density [g/cm³] @ 20°C  DIN EN ISO 2811-1 / ASTM D-1217 Comp. A: 1,12 ± 0,02
Comp. B: 1,05 ± 0,02
Density [g/cm³] EN ISO 1183 / ASTM D-792 1,02 ± 0,02
Tensile strength [MPa] ISO 37-2005 / ASTM D-638 ≥ 5
Elongation at  break [%] ISO 37-2005 / ASTM D-638 ≥ 90
Hardness [Shore A] ISO 868-2003 / ASTM D-2240 85 ± 5
Hardness [Shore D] ISO 868-2003 / ASTM D-2240 30 ± 5
Abrasion resistance [mg] ASTM D-4060 < 10 (wheel CS17; 1000 g; 1000 cycles)
Peel off strength [N/mm] ISO 813 / ASTM Steel: ≥ 8
Concrete: ≥ 1,5
Max. process temp. [°C] ISO 11346 / ASTM D-2485 Wet: 60
Dry: 130
Peak temperature dry: 150
Storage conditions [°C] DIN EN 12701 / ASTM 10 – 30 (in closed original drums, stored at dry and well ventilated place; beware of freezing)
Shelf life – Approximately 9 months

Please see our our Delivery policy page for full details of our delivery terms and conditions, including information on exclusions, geographical restrictions, third parties, and failed deliveries.

1. Delivery Timescales

We will endeavour to deliver all orders within 1-3 working days (subject to geographical restrictions). Please note, where delivery lead-times for individual orders may be subject to change, we will keep you informed directly by phone or email within 24 hours of your order being placed.

Deliveries will not be made on UK bank holidays, and in such cases will fall on the next working day.

Standard delivery hours are between 8am and 6pm, Monday to Friday. If you are not available to accept the delivery when it is attempted, then a failed delivery charge will be applied (see the Delivery page for full details)

2. Delivery Fee Structure:

All orders, excluding those containing products covered in section 3 below, will be subject to the below delivery fee structure:

  1. Total order weight is between 0kg and 10kg = £7.99 standard delivery fee
  2. Total order weight is between 10kg and 20kg = £12.99 standard delivery fee
  3. Total order weight is between 20kg and 75kg = £20 standard delivery fee
  4. Total order weight is 75kg and above = £60 large order delivery fee
  5. Total order value exceeds £500 (regardless of weight) = Free delivery

3. Exclusions

The delivery fees detailed above apply to all orders, excluding:

  1. Orders containing insulation will be charged at £60 per pallet (10 units per pallet). Please get in touch with us directly for pricing and ordering.
  2. Orders containing protection boards: A large order delivery fee of £60 will be applied.
  3. Orders containing membranes of two metres wide and above: The delivery fee will be calculated as a price per unit*.
Code Description Weight (kg) Delivery Fee Per Unit
Multiple All membrane products with a width of two metres and above Varied £20
M3 Newton CDM 508 Mesh 29.26 £25
M2 Newton CDM 508 eco Floor 41.3 £30
M4 Newton CDM 520 eco Floor 37.62 £40

*Please note that, for orders containing membranes of two metres wide and above:

  1. Once the total order weight exceeds 75kg then the £60 large order fee will automatically be applied
  2. Once the total order value exceeds £500 then the free delivery policy will automatically be applied

4. Geographical Areas

The above delivery fees apply to all postcodes in mainland England, Wales and Scotland.

For deliveries to Ireland, Northern Ireland, the Channel Islands, the Scottish Isles, and any international orders please get in touch with the BaseTec team directly by email or phone for a custom delivery price. Standard delivery timescales do not apply to these areas and will be advised on request.

Additional charges, including customs fees, duties, or taxes may apply for international orders.

Reviews

There are no reviews yet.

Be the first to review “VIP Coatings QuickFill SL Standard – 600ml Dark Grey”

You may also like…

Shopping Basket
INC VAT EX VAT