• Fast Delivery
  • Expert Support
  • Low Trade Prices
  • Quality Products
  • Next-Day Delivery
  • Expert Support
  • Low Trade Prices
  • Quality Products
DCP Repcoat ZR Anti-Corrosion Coating - 1 LitreDCP Repcoat ZR Anti-Corrosion Coating - 1 Litre

DCP Repcoat ZR Anti-Corrosion Coating – 1 Litre

Brand: DCP
Product Code: FG-CR-04000001
In Stock

Repcoat ZR is a one component, epoxy based, zinc rich primer, designed to provide active anti-corrosion coating for steel reinforcement.

£46.28 incl. VAT
£38.57 excl. VAT

Qty:

One component, zinc rich anti-corrosion coating. Repcoat ZR is a one component, epoxy based, zinc rich primer, designed to provide active anti-corrosion coating for steel reinforcement.

Applications: 

Repcoat ZR is used as protective and anti-corrosion coating for reinforcing steel bars. Repcoat ZR can be used on normal steel and galvanized steel as a primer for rust protection. Repcoat ZR is compatible with all Cempatch Range of concrete repair products from DCP and fluid micro concretes.

Advantages: 

  • Provides a protective coating from corrosion for steel by active electro-chemical means.
  • Easy application, single component.
  • Cost effective, no waste and no pot life limitations.
  • Excellent resistance to salt and chloride attacks.
  • Compatible with all Cempatch Range of concrete repair products from DCP.

Standards: 

Repcoat ZR complies with EN 1504-7 for reinforcement corrosion protection requirement principle 11.1.

Coverage: 

The coverage rate is 6 m²/litre per coat to achieve a dry film thickness of 50 microns per coat.

Storage:

Repcoat ZR has a shelf life of 12 months from the date of manufacture if stored in dry conditions away from direct sunlight at temperatures between 5°C and 35°C. If these conditions are exceeded, DCP Technical Department should be contacted for advice.

Technical Properties
Colour Grey
Pack size 1 litre
Specific gravity 1.85 ± 0.05
Tack free time 35 – 45 min @ 20°C
10 – 15 min @ 35°C
Minimum recoating time 30 – 60 min @ 20°C
15 – 40 min @ 35°C
Volume solid by weight 70 ± 5%
Dry film thickness 50 micron/coat
Wet film thickness 165 micron/coat
VOC: ASTM D2369 < 700 g/ltr

 

Performance Characteristics EN 1504-7 Requirement Measured Value
Corrosion protection: BS EN 15183 1.0 mm ≤ 0.3 mm

Please see our our Delivery policy page for full details of our delivery terms and conditions, including information on exclusions, geographical restrictions, third parties, and failed deliveries.

1. Delivery Timescales

We will endeavour to deliver all orders within 1-3 working days (subject to geographical restrictions). Please note, where delivery lead-times for individual orders may be subject to change, we will keep you informed directly by phone or email within 24 hours of your order being placed.

Deliveries will not be made on UK bank holidays, and in such cases will fall on the next working day.

Standard delivery hours are between 8am and 6pm, Monday to Friday. If you are not available to accept the delivery when it is attempted, then a failed delivery charge will be applied (see the Delivery page for full details)

2. Delivery Fee Structure:

All orders, excluding those containing products covered in section 3 below, will be subject to the below delivery fee structure:

  1. Total order weight is between 0kg and 10kg = £7.99 standard delivery fee
  2. Total order weight is between 10kg and 20kg = £12.99 standard delivery fee
  3. Total order weight is between 20kg and 75kg = £20 standard delivery fee
  4. Total order weight is 75kg and above = £60 large order delivery fee
  5. Total order value exceeds £500 (regardless of weight) = Free delivery

3. Exclusions

The delivery fees detailed above apply to all orders, excluding:

  1. Orders containing insulation will be charged at £60 per pallet (10 units per pallet). Please get in touch with us directly for pricing and ordering.
  2. Orders containing protection boards: A large order delivery fee of £60 will be applied.
  3. Orders containing membranes of two metres wide and above: The delivery fee will be calculated as a price per unit*.
Code Description Weight (kg) Delivery Fee Per Unit
Multiple All membrane products with a width of two metres and above Varied £20
M3 Newton CDM 508 Mesh 29.26 £25
M2 Newton CDM 508 eco Floor 41.3 £30
M4 Newton CDM 520 eco Floor 37.62 £40

*Please note that, for orders containing membranes of two metres wide and above:

  1. Once the total order weight exceeds 75kg then the £60 large order fee will automatically be applied
  2. Once the total order value exceeds £500 then the free delivery policy will automatically be applied

4. Geographical Areas

The above delivery fees apply to all postcodes in mainland England, Wales and Scotland.

For deliveries to Ireland, Northern Ireland, the Channel Islands, the Scottish Isles, and any international orders please get in touch with the BaseTec team directly by email or phone for a custom delivery price. Standard delivery timescales do not apply to these areas and will be advised on request.

Additional charges, including customs fees, duties, or taxes may apply for international orders.

Reviews

There are no reviews yet.

Be the first to review “DCP Repcoat ZR Anti-Corrosion Coating – 1 Litre”

You may also like…

Shopping Basket
INC VAT EX VAT